Evoqua water treatment system LaboStar RO DI - ProfiLab24 GmbH
99
100
24
4
stars -
Professional service
Customer
Young team with a lot of ambition and quick answers to all questions. We needed a complete laboratory equipment for our new location. The team of Profiab24 has arranged everything.
Evoqua water treatment system LaboStar RO DI
Item number: EVO_21029
EAN: 4064343437288
Manufacturer:
Evoqua
Now only
4.140,10 €
Manufacturers suggested retail price:
4.358,00 €
Excluding 19% VAT. ,
plus
(Standard)
(including 19% VAT. 4.926,72 €)
Evoqua water treatment system LaboStar RO DI
High-quality water with very low energy consumption
- Easy module replacement thanks to quick couplings?
- Service and maintenance messages
- Consumables are part of the scope of delivery
- Manufactured in Germany
The use of ''low energy'' membranes ensures extremely efficient and economical operation.
All LaboStar? RO DI units are equipped with an integrated 7 L storage tank.
Pure water is stored in this tank and circulated using an integrated pump.
The LaboStar RO DI system is equipped with a final DI cartridge.
This cartridge is used to produce type II quality reverse osmosis water with a conductivity of less than 0.1 µS/cm.
The unit is equipped with two dispensing nozzles: Water can be taken under pressure from the dispenser at the point of use or from the outlet on the back of the unit.
Optionally, a charged 0.2 µm sterile filter can be used on the dispenser to remove bacteria and endotoxins. A non-charged 0.2 µm sterile filter is also available. The capacity of the 7 L storage tank can be increased by an additional 30 L or 60 L tank.
LaboStar RO DI units are supplied ready to use, including all necessary filters and modules.
Product features
- Connection to the municipal drinking water supply
- Integrated 7 L storage tank
- Pure water circulation directly into the dispenser head
- Convenient water withdrawal using the practical dispenser at the point of use
- 0.2 µm sterile filter with option for endotoxin separation
- Whisper-quiet operation
- Quick and easy disinfection
- Conductivity monitoring for RO and DI water
- Easy module exchange using quick couplings
Width (water treatment):
|
290 mm
|
Booster pump:
|
with
|
Height (water treatment):
|
535 mm
|
Ideal for:
|
ElectrophoresisMedia productionPhotometry and spectrophotometryBuffer approachCythology and histological workPathologyICLast rinse cycle of laboratory rinsing machines Feeding ultrapure water systemsGeneral chemistry
|
Power:
|
1,2 l/min
|
Modules:
|
Pre-treatment module AMBRO-module
|
Depth (water treatment):
|
400 mm
|
Storage tank - tank:
|
with
|
Water treatment type:
|
pure water systemFeed water
|
Water source:
|
from the water mains
|
Shipping weight: |
24,00 Kg |
Dimensions: |
× × cm |
Evoqua water treatment system |
LaboStar 10 RO DI |
Feed water |
|
Demand (l/h) |
14 - 20 |
Inlet pressure (bar) |
0,1 - 5 |
Temperature (°C) |
5-30 |
Conductivity (μS/cm) |
< 2000 |
CO2 (mg/l) |
< 20 |
SDI |
< 3 |
Iron, total content (mg/l) |
< 0,1 |
Free chlorine (mg/l) |
< 0,1 |
Product |
|
Permeate capacity at 15 °C (l/h) |
10 |
Permeate capacity at 20 °C (l/h) |
11 |
Permeate capacity at 25 °C (l/h) |
13 |
Salt retention rate RO minimum (%) |
98 - 99 |
Yield (%) |
30 |
Pure water quality (μS/cm) |
< 0,1 |
Bacteria retention rate (%) |
> 99 |
Bacteria* (CFU/ml) |
< 1 |
Particle retention rate (%) |
> 99 |
Particles > 0.2 μm* per ml |
< 1 |
Germ count reduction (%) |
> 95 |
Germ content (CFU/ml) |
< 10 |
Flow rate dispenser (l/min) |
up to 1.2 |
Withdrawal rate at 0.5 bar (l/h) |
70 |
Withdrawal capacity at 1.0 bar (l/h) |
65 |
Technical data |
|
Working pressure, max. (bar) |
6 |
Power consumption, max. (W) |
184 |
Electrical connection |
100 - 240 V/50 - 60 Hz |
* only in combination with a 0.2 μm sterile filter
LaboStar RO DI water treatment system with:
7 litre tank
Product water pump 1.2 l/minute